oldborn
BANNED
- May 14, 2010
- 1,115
- 0
- 0
Alex Simmons/RST said:Who said I was advocating expensive decisions?
Indeed I am advocating the smart use of a measurement tool so that one can make very effective but quite cheap improvements.
You are talking about changing wheels, helmet & cranks without actually knowing how much improvement they represent for your investment.
Alex I should be stupid to spent 1500 or more something and then test.
Alex Simmons/RST said:But what if some of those changes actually reduces your speed?
Well we would know that after. Are pro riders 100% sure about their set up? No they are not, why do you think that I should be better than they?
Alex Simmons/RST said:And can you distinguish between improvement due to being fitter, due to improved aerodynamics, and/or better weather conditions?
Well smart one, I know weather conditions was, at least wind speed, I would be stupid if I am going hard on wind, with or without PM. I would be happy to see any improvements.
Alex Simmons/RST said:OK, well, going over your list:
Happy to do this
Alex Simmons/RST said:Just 10 points:
1.Removing 1,5cm spacers (getting more aero)
This may or may not improve your aerodynamics and may reduce your power output. Lower is not always better, depends on current positionw Until you test to determine whether or not your power to aero drag ratio increases, then you won't know if this is better for you.
You are wright. IMHO my stem is so high that I have almost 5cm to drop damn thing. I just watched photos from race, too high.
Again I must buy PM to determine CdA or doing really pain in the *** calculation. I choose simple solution.
Alex Simmons/RST said:2.Moving ISM saddle 0,5 cm forward
See #1
3.Shorter cranks 172 or shorter (i am riding 175 from old 58 bike)
See #1
Agree, but that ISM is so wide for my *** that I had trouble with it. Moving forward is going to be more agresive and riding on top of that saddle. Well those cranks are really big for me, I am 178cm.
Alex Simmons/RST said:4.60mm deep rims
Depends on what you are using now. Why not use something even faster if you are spending the money? A rear wheel cover is excellent aero bang for you buck. Don't forget good tyres and latex tubes.
Anything is better than 23mm. Disc is really way out of my budget.
Alex Simmons/RST said:5.Going little bit harder on hills
Harder than what? Perhaps you are already going hard enough and going harder may in fact be sub-optimal. I have examined pacing of many long course triathletes and one of the most common mistakes is going too hard on the hills.
Well I spare myself enough cos reasons you mentioned. Just to answer your question; harder then last race, remember cogs we have, I did all hills on biggest one- 25 teeth with 65 or so cadence, next year 23 teeth with same cadence.
Alex Simmons/RST said:6.Eating and drinking while on small descents
Not sure where on the course you choose to eat will impact your overall speed?
Well I was eating on really flat or uphill parts and loosing time, I think that I can rest and drinking on descents, and concentrate on flat.
Alex Simmons/RST said:7.Aero helmet
Most likely, if your current helmet is not all that aero. However not all aero helmets are the same on all riders (I have tested one aero helmet that was no better than my mass start helmet). What is aero on one rider is not necessarily nearly as aero on another rider. This is especially an item that riders really should test for themselves. Do not rely on what works for someone else.
Thanks for advice, IMHO everything is better than mine 10 years old Giro.
Alex Simmons/RST said:8.Stay aero on 1-3% ascents and going more harder
You mean you weren't staying aero before on shallow gradients?
Then yes this will probably help, although when you go to 2%+ gradient, power to weight plays a much bigger role (at 2% gradient the power to overcome air resistance and gravity is roughly equal), so if you are sacrificing power in your aero position, then you will need to know how to modify that position on such gradients for best overall impact to speed.
Thanks. No I had no strenght to stay in aero, you know how it feels. But then I was watching some pros, damn they just stay down all the time. This would spare me some time as you said.
Alex Simmons/RST said:9.Remove bottles from down/seat tube
As Frank points out, that may or may not help.
Considered done.
Alex Simmons/RST said:10.Adjust elbow pads (getting more aero).
In what way? How will you know if the change is better? e.g. on some riders, narrow elbow pads is faster, for others a wider pad position is faster. Everyone is different. That's why we test to make sure.
Cos I am having really wide shoulders for my torso, moving elbow pads together (and not sacrifice lungs shrunk) might help.
Alex Simmons/RST said:10.and stay in triathlon suit after swimm whatever cold it would be.
No comment. Clothing is one significant area of aero improvement opportunity. Do not allow anything that flaps in the wind.
Yes, I was afraid of getting cold, those are Alps Dude. So I had to choose, getting cold or more aero.
Alex Simmons/RST said:11.Quit smoking LOL
This one will save you money!!
Well we agree at something.